So my alternator seized up on me recently, I got a new one and im looking to replace it. I've got all the drivebelts removed and the old alternator is off the mounts, but i cant figure out which bolts/mounts i need to remove exactly to move my half shaft out of the way and get clearance. Somebody please point out what I need to do, here's pix of what I'm talking about
:
1. View from outside the caliper
2. Closer view inside the wheel well (Alternator is rested on the half shaft)
3. View from above the engine block (You can see where the alternator is resting and the clearance i have to the ground)
any pointers will help, this is my first time working on an integra. thanks!