|
Dont have time for pics right now but here's the crash course:
total of 6 bolts need to be removed. Bottom cushion comes out first. There are two clips underneath the front of the rear cushion. Reach your fingers up, pull the clip toward the front of the car while pushing down on the cushion. This will release the front of the bottom cushion. To release the rear of the bottom cushion, dig between the top and bottom cushions, more towards the passenger side. There's a 10mm bolt that needs to be removed. The bottom will come right out after you remove that bolt.
The top cushion then has 5 more bolts to release. Lift up each headrest, there's a pocket that you can get a socket into, 10mm. Remove both of those. Then there are 3 10mm bolts on the bottom ( One is located drivers side middle) The other two are on each end at the bottom, between the edge of the seat and the rear door threshold trim panel. It's not too bad when you know what to look for. Careful removing the seat. There are metal brackets that can do damage when you're pulling it out. Have fun! JP
|