6. As you pull apart the headlight, get your friend to locate the clips on each side, and pry them up with a flathead screwdriver (right next to the corner you started on, on the side of the headlight, there is a tab that requires you to wedge the flathead under the black plastic part in order to pop it). Keep poping more tabs as you go along:
http://www.acurainspired.com/albums/.../abc.sized.jpg
7. After the headlight starts comming apart, you will notice that the sealant will stretch as you pull at it. DO NOT let the sealant stretch! It will get on everything if you do. Get your friend to cut along the sealant WHILE you pull the headlight apart:
http://www.acurainspired.com/albums/.../aaq.sized.jpg
8. From the corner that you started at, we chose to work along the top edge of the headlight, pulling, unclipping the tabs, and cutting the sealant:
http://www.acurainspired.com/albums/.../abd.sized.jpg
9. After the top is completed, move along to the bottom. We went along the top, around the pointy end of the headlight, and worked our way to the bottom edge:
http://www.acurainspired.com/albums/.../aap.sized.jpg
10. Continue pulling, unclipping and cutting sealant until you've worked around the whole headlight:
http://www.acurainspired.com/albums/.../aao.sized.jpg