|
Larry Garcia is a VERY talented guy. I have talked to him on a couple of occasions. (e-mail). That looks very impressive. The HP numbers are not supprising at all.
Anytime you put more than 475+ hp out of a stock NSX motor, you have to change the head bolts. They will streatch if you don't and lift the heads off of the block. Also, more than 9 lbs of boost calls for 9.5 or lower compression pistons. If you try and run stock pistons with more boost, you will be looking at it from the cab of a tow truck. There are only a couple great NSX techs on the west coast. Mark Basch and Larry Garcia to be specific. I'm working on putting an NSX shop on the east coast. Keep your fingers crossed.
Barn Man..
|