|
|
|
|||||||
| Do It Yourself No more whining, "I don't know how!!!!!" Suck it up and try, babies! Posts in this forum are moderated, so it may take time for your post to display. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
06-02-08, 01:18 AM
|
#1 (permalink) |
|
Registered User
Join Date: Aug 2005
Age: 28
Posts: 3
Car 1: 87 acura integra Car 2: 91 honda civic |
PROJECT HELP!!
hello all i am beggining my project car which is an 87 acura intgera ls with the d16a1 motor i have the motor at a local machine shope to get forged pistons h-beam rods and it will have 8:8-1 comp and will be replacing the stock springs after a break in period but i am hoping to run a turbocharger setup but my problem is that my car has a MAP sensor and anything above 3 psi will mess with it and i was wondering if anybody knows of the best place to get an affordable stand alone or possibly have a budget minded fix for this problem i would greatly appreciate the help i am planning on buying a turbo charger setup from gmoto garage on ebay which seems to have everything included in the package but have never heard of them if anybody has heard good bad or ugly about this set-up i'd appreciate the infO
ty for the help -brant |
|
    
|
| Sponsored Links | |
Advertisement |
|
|
06-04-08, 01:00 PM
|
#2 (permalink) |
|
Vigorous
 Join Date: Aug 2005
Location: New York City
Age: 28
Posts: 150
Car 1: '93 Vigor Car 2: '92 Vigor Car 3: '92 Vigor |
What ever happened to the use of punctuations? I didn't see a single period in that ramble of yours. How is it that you expect people to understand you, when you don't even try to communicate properly?
Not to rain on your parade, but your setup is pretty particular and I don't think you'll get much response here. Good luck on your Project. |
|
|
|
Linear Mode
