OEM part just called "mirror" or "glass" is what goes on there if your mirror is like top picture, can confirm that. There's a plastic frame on the back with all the necessary attachments; it's all considered one part even though calling it just "glass" sounds like it wouldn't be everything. I ended up ordering through my local dealer as they could get it in one day, and did! Costly, $38 with tax, although similar cost to having shipping that fast. I guess I didn't NEED it that fast, but it's been bugging me. If you can get junkyard to sell you only this piece, that would be better, but they might want you to take entire mirror assembly. Of course, it might still cost less.
Only thing is, I can't quite get it on there right. I'm sure it will stay attached onto that large center piece, but I can't get the smaller pieces where the motors adjust to stay attached. So it'll sorta adjust in one direction, then won't go back the other direction, etc. Not sure if I just have to use what seems like a ridiculous amount of force to press it in or what. I know I read about this somewhere but don't remember where and don't remember if they figured it out either....
EDIT: After looking around for 10 minutes not finding anything, just went back down and applied more force to those points, and that worked. The bottom one (which controls the up/down movement) is the hardest, or at least was on this car. So, when you're installing this thing, the center attachment will snap in first, with the least force. The left/right adjuster peg (to the right of the center piece) takes somewhat more force. And the up/down adjuster takes a little more than that, most likely. Just listen for the snap.
Last edited by CrazyOne; 07-13-10 at 09:15 PM.