|
|
|
|||||||
| Integra Forum related to the Acura Integra |
 |
|
|
LinkBack | Thread Tools | Display Modes |
08-03-08, 12:07 AM
|
#3 (permalink) |
|
just call me moe
 Join Date: Dec 2005
Location: spokane, WA
Age: 21
Posts: 4,967
Your Mood: 
Car 1: 94 integra ls (RIP) Car 2: 94 integra ls vtec (sold) Car 3: 95 gsr |
they will work, but where the header meets the cat is different, so you will need to take out pipe or add on.
__________________
|
|
    
|
|
08-05-08, 01:58 PM
|
#4 (permalink) |
 The Mongolian
 Join Date: Dec 2002
Location: Chan Marino, CA
Age: 24
Posts: 6,377
Your Mood: 
Car 1: 2002 RSX Car 2: 2007 Honda Ridgeline Car 3: 2005 Honda Civic |
It will bolt on the head the same and both have similar deck heights, so there would be no issue there. You may have to go down to the muffler shop afterwards for either lengthening or shortening of exhaust componets.
__________________
 Click here to see my gallery! Thanks To my sponsors and affaliets: M1 Autobody, ICB Motorsports, Honsport, Hondata, E Auto Parts, New Century Auto, APR Performance, Toyo Tires, Buddy Club USA, Torco Racing Oils, GenX Graphics |
|
|
|
08-05-08, 03:49 PM
|
#5 (permalink) | ||
|
What is Hip?
Join Date: Jun 2008
Location: Central Valley
Age: 23
Posts: 44
Car 1: 1990 Integra RS |
Quote:
Quote:
 |
||
|
|
|
|
08-05-08, 07:42 PM
|
#7 (permalink) | ||||
|
Integra Mod/2nd Gen Guru
Join Date: Feb 2003
Location: Duxbury, VT
Age: 24
Posts: 4,018
Your Mood: 
Car 1: 92 Integra GS (Auto) Car 2: 99 3.2L TL Car 3: 97 3.0L CL |
You're going to run into a problem with the attaching flange that bolts the exhaust manifold to the mounting bracket...
Take a look...  See the piece that sticks out on the right. Different years have slight adjustments in those mounting brackets.. Depending on the application you may need to weld in or create a new bracket. I know between 90-91 and 92-93 Integras they don't fit exsactly.
__________________
 CARS: Sold & Crushed: 90' Integra 4-Dr LS | 92' Integra 2-Dr GS | 95 Legend Type-II | 95 Legend LS | Current:
|
||||
|
|
|
|
08-05-08, 08:38 PM
|
#8 (permalink) |
|
The Mongolian
Join Date: Dec 2002
Location: Chan Marino, CA
Age: 24
Posts: 6,377
Your Mood:
Car 1: 2002 RSX Car 2: 2007 Honda Ridgeline Car 3: 2005 Honda Civic |
Yea, down on that end. As far as bolting the primary onto the head, no problems.
__________________
Click here to see my gallery! Thanks To my sponsors and affaliets: M1 Autobody, ICB Motorsports, Honsport, Hondata, E Auto Parts, New Century Auto, APR Performance, Toyo Tires, Buddy Club USA, Torco Racing Oils, GenX Graphics |
|
|
|
|
08-06-08, 01:33 PM
|
#9 (permalink) |
|
Registered User
Join Date: Aug 2005
Location: Bay Area, Ca.
Age: 31
Posts: 620
Your Mood: 
Car 1: 2001 Integra GS-R |
the 94-99 C1 has the bolts welded to the bracket on the manifold while the 99-01 C1/ 96-01 C5 has the bolts welded to the bracket coming off of the engine, as well as having a longer secondary.
__________________
Thanks tegger! I like my cars like I like my women, small and maneuverable. Don't bring show to a go fight. Type-R Swap (Legal!!!!) Type-R Tranny Moroso 5qt Oil Pan K&N Filter Exedy Street Disc & ACT HD pressure plate SR Motorsports 9.5lb Flywheel Skunk 2 Front Upper Control Arms Tien Flex Coil-Overs Carbing Type 2 Front Strut Tower Brace Password JDM 4pt Rear Strut Tower Brace ASR 32mm Hollow Rear Sway Bar ASR Lower Tie Brace G-Stop stainless brake lines Hawk Pads 15" Gunmetal Rota Torques 16" Gold Rota Boosts with Falken 615's for Autox Buddy Club short shifter USDM ITR Front and Rear Seats ITR Lip and Side Skirts |
|
|
|
Linear Mode
