I recently bought a rough car and changed the head gasket on the 1997 Acura TL 3.2 V6. Wasn't the easiest thing but I did it and now it wont start. Before I changed it, the car would start after a few tries but there would be soo much coolant in the cylinder, it was rare. After changing the head gasket, I connected everything, made sure there was proper grounding to all of the wires, got new spark plugs, checked the camshaft and crankshaft sensors, injectors are firing, I have fuel pressure, compression. Everything seems to be working, but it will not turn over. I didn't jump timing, and everything is rotating. The only downfall is the RPMs don't budge. and after a few cranks, the spark plugs seem to be flooded with gas. What could be the problem? Any help would be appreciated.