Acura World banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 · (Edited)
So I have a Integra GSR that I purchased that had a JDM B20 OBD1 in it

I am currently buying all the parts needed to return it to its former glory
I have every part that I need. 2001 ECU, Wire harness, etc. I just need the engine.


I just have a few questions to ask.

I do not have the original key, am I able to bring the 2001 ECU to Honda and get a key made? (what is the average price of getting a key made?)

If I do get a key made, can I put the ECU in my car with the B20 to see if the car starts? (I have OBD2B wiring so the ECU works)

Also will any 1996-2001 GSR Engine work with the 2001 wiring?


I need to pass the OBD2 Echeck so OBD1 is not an option.

Thanks in Advance
 

·
AW Detailing Wanker
Joined
·
16,287 Posts
You should be able to get a key for it if you have the title/registration and drivers license. Paperwork will have to match the name on the license.

An OBD II motor should hook up to the OBD II Harness and ECU just fine as far as I know. I would not put a stock 1.8L ECU and run a B20 off it. It may work but I wouldn't recommend it, unless you're planning on trashing the B20 anyways.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thanks for the Info, I would just put the B18C1 ECU on the B20 to make sure the key worked, then swap it back to the OBD1 P72 LS ECU

I have my Title, and paperwork but the ECU was bought off ebay second hand, so it isn't the original ECU

and sorry for the late late reply, almost a month.
had issues to deal with
 
1 - 3 of 3 Posts
Top