Acura World banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
2004 to, replaced both axles, wheel.bearings & sensors. NO lights were on before parts installed and car.ran perfect. After installing parts, the abs,vsa & /!\ lights came.on, paper.clip reset them, came back on.. had an ABS code.reader hooked up, bad right wheel sensor,
Replaced with new.sensor, still have all the lights on. No issues with the car at all.
 

·
Registered
Joined
·
1 Posts
Error Code 84 - VSA sensor neutral position memorization - Acura TSX Forum
(I'm not allowed to post URL - my 1st post), but if you should Google above, you'll find it at top result.)

I had "VSA warning light /!\ plus+ VSA" on 2006TL, but no ABS warning light.
When I tried reset procedure above for the first time, I began with VSA neutral position reset procedure since I don't have ABS light on, WRONG.
After failing many times with VSA reset, then I began the procedure with ABS resetting, worked at first try! Great post by Russian Comrade "Bardissimo".

Hope this works for you as well.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top