Acura World banner
1 - 6 of 6 Posts

·
Registered
Joined
·
3,054 Posts
Shouldn't be a problem for 17x7 and +48.

Alot of people run 225/45 on stock CLS/TLS wheels which are just about the same size...

As long as you are not drastically lowered (more than 2 inches) you should be fine.

Btw, I edited the topic and I'm moving this to Wheels/Tires. :)
 

·
Registered
Joined
·
3 Posts
I'm running 17 x7 with 48mm offset, Michelin Pilot XGTZ4 225/50 tires and H&R OEM springs. With these tires I had to roll the fenderwells on both sides as well as cut the tabs. The fronts were no problem. The reason I chose this size tire is because the diameter matches the stock size almost perfectly. BTW, mine is a 99.
 

·
Bling_Bling INSPIRE 32V
Joined
·
3,018 Posts
sutlTL said:
I'm running 17 x7 with 48mm offset, Michelin Pilot XGTZ4 225/50 tires and H&R OEM springs. With these tires I had to roll the fenderwells on both sides as well as cut the tabs. The fronts were no problem. The reason I chose this size tire is because the diameter matches the stock size almost perfectly. BTW, mine is a 99.
17 X 7 +48 offset w/H&R OE springs and it rubs??? :rolleyes:
 

·
Registered
Joined
·
41 Posts
Discussion Starter · #6 ·
Edub said:
Shouldn't be a problem for 17x7 and +48.

Alot of people run 225/45 on stock CLS/TLS wheels which are just about the same size...

As long as you are not drastically lowered (more than 2 inches) you should be fine.

Btw, I edited the topic and I'm moving this to Wheels/Tires. :)

Yeah ok. My car is not lowered and probably won't be since the roads here are so messed up. Sorry about posting it at the wrong place.

:)
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top