Acura World banner
1 - 4 of 4 Posts

· Banned
235 Posts
If you're unable to make the alarm stop on your Acura, here are a few steps you can take to troubleshoot the issue:
  1. Use the Key Fob: If you have a key fob, try pressing the "unlock" button to see if it stops the alarm. You can also try locking and unlocking the doors a few times.
  2. Disconnect the Battery: Disconnecting the battery can sometimes reset the alarm system. To do this, disconnect the negative battery cable and wait for at least 15 minutes before reconnecting it. This should reset the alarm system and allow you to start the vehicle.
  3. Check the Hood Latch Sensor: If the hood latch sensor is malfunctioning, it can trigger the alarm system. Check to see if the hood is properly closed and that the sensor is not damaged or dirty.
  4. Check the Door Sensors: Similarly, a faulty door sensor can trigger the alarm system. Make sure all doors are properly closed and that the sensors are not damaged or dirty.
  5. Check the Alarm Fuse: If none of the above steps work, check the alarm fuse in the fuse box. If the fuse is blown, replace it with a new one of the same amperage rating.
If you're unable to troubleshoot the issue on your own, it's best to take your Acura to a certified dealership or a trusted mechanic for diagnosis and repair. They will be able to diagnose the problem and fix it so that the alarm stops.
1 - 4 of 4 Posts