Acura World banner

1 - 1 of 1 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Tools:
-Phillips head screw driver
-Felt with adhesive on back
-Scissors


-Open driver door and look at top outside corner of door.

-Peel the weatherstripping off the corner. It is held on by a plastic clip, just pull outward and clip will release. Remove screw under the weatherstripping that holds the outside sash on.
IMG_3891.JPG

IMG_3892.JPG


-Release this clip that holds the top trim on. Do not pull hard on this piece as you only need to flex this a little to untuck the outter sash for removal.
IMG_3894.JPG

-Untuck the upper piece of the outter sash and then slide the sash upwards to unhook.
IMG_3895.JPG
IMG_3896.JPG
 
1 - 1 of 1 Posts
Top