Acura World banner

1 - 1 of 1 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Tools:

-Ratchet or Philips head screw driver
-Flat head screw driver


-Lift rear gate

-Pry off rear light assembly screw covers with flat head screw driver

0918141803.jpg

0918141804.jpg

-Unscrew both bolts with phillips screw driver or ratchet
0918141805.jpg

-Once both screws are out wiggle the entire lens towards the back of the truck to give yourself enough of a gap to squeeze a flat head screw driver in between the body and the rear lens. Use a towel over the screw driver so you dont scratch the paint. Once you have at least 1/4 to 1/2 of the screw driver tip in the crack then you're going to want to twist the screw driver to help pry the lens out.
0918141806.jpg

This is whats holding the lens to the body:
0918141808.jpg
 
1 - 1 of 1 Posts
Top