Acura World banner

1 - 2 of 2 Posts

14 Posts
Discussion Starter · #1 ·
Once you've removed all the screws that hold the trim piece in place and the one that holds the cam enclosure you should have just enough wiggle room to pull the trim down and see the 2 clips that hold the cam up inside the rear gate.

There should be enough room to squeeze a small flat head screwdriver in and all you have to do it push forward on the clip and pull down easily.. do one then the other the same way..

That should release the camera and then you can pull the trim out and get to the license plate lights. Here are some pics to see what you are dealing with.



These 2 screw mounts act as a screw and a clip for the camera.

1 - 2 of 2 Posts