Acura World banner
1 - 20 of 23 Posts

·
AW Detailing Wanker
Joined
·
16,287 Posts
We have a function here on this site, its similar to google except it only does it on this site. Its called the search function. If you use it and put in something along the lines of "ls vtec" then you should get plenty of results.
Here are some of the ones I found by searching AW
http://streetracing.org/home.php?op=go&id=1217
http://www.acuraworld.com/forums/showthread.php?t=44585&highlight=vtec+conversion
And within the first search on Team-Integra.net I found:
http://www.team-integra.net/forum/display_topic_threads.asp?ForumID=10&TopicID=6552

And a quick search on google for ls-vtec conversion kits brings up this site:
http://shopping.lightningmotorsports.com/customer/search.php?substring=VTEC+Conversion+kit

Yes thats all you need to convert your ls to a vtec engine, more or less.

Now don't you feel silly for not seeing that little search button up there. It will answer more questions than we will.
 

·
HERO
Joined
·
1,098 Posts
i have the head for whenever you decide to do it, if you do.
 

·
S Y T F U
Joined
·
597 Posts
how does taking a gs-r head work to making my block to ls vtec? can someone help me understand this and what you need to do
You slap on a VTEC head onto the LS block, wire it up for VTEC to work, and voila, you have a simple/stock LSVTEC setup. Easy as that.... but don't think you could take the motor up to a stock GSR/B16 redline and expecting it to be reliable. That's just not going to happen on a stock LS block.
 

·
AW Detailing Wanker
Joined
·
16,287 Posts
I vote sticky, this thread actually has some good links in it for LS/VTEC unlike every other one on this site. Our information base for this conversion sucks.
 

·
Registered
Joined
·
477 Posts
check out b20vtec.com for a full write up on how to do the conversion
 

·
AW Detailing Wanker
Joined
·
16,287 Posts
You already posted that link g2teg. Nicely done.
 

·
Registered
Joined
·
36 Posts
Can I put the V-tec head on my D161A? Is it easier or harder to do?
 

·
just call me moe
Joined
·
5,478 Posts
ok i did some searching, and a quick way to add hp to your car is buy some cams out of a zc engine. its good for about 12hp and 3 lb ft. which isnt bad. andi found some stage 2 zc cams on ebay too.
 

·
Registered
Joined
·
36 Posts
ok i did some searching, and a quick way to add hp to your car is buy some cams out of a zc engine. its good for about 12hp and 3 lb ft. which isnt bad. andi found some stage 2 zc cams on ebay too.
Talking about my D-series motor?
 

·
Registered
Joined
·
36 Posts
Okay after a little research also i figured out you are talking about my motor. What do i snag ZC cams off of?
 
1 - 20 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top