Acura World banner
1 - 6 of 6 Posts

·
Registered
Joined
·
30 Posts
Touch up paint with a few light coats will cover. Let it dry for couple of days before you touch it. You will be able to see it up close, but not from day 6 ft away
grit sandpaper use to remove clear coat is reliant on whether you're starting wet or dry. If you're starting dry, use 800-grit first. Once you start wet sanding, use 1,000-grit, then finish off with 1,200-grit. If you need to blend sanded areas, use 2,000-grit.
 
1 - 6 of 6 Posts
Top