[Kezzie]

New to the site and trying to replace two broken wheel studs on 1st gen RL. Took apart brakes and suspension, then popped out the axle BUT the hub still would not come off. Anyone have video or DIY pics..something...anything..thanks


Sent from my iPad using AG Free

 

[Kezzie]

No help?? Any RL drivers out there?


Sent from my iPad using AG Free

 

[Kezzie]

?????


Sent from my iPad using AG Free

 

[Kezzie]

Any help would be appreciated


Sent from my iPad using AG Free

 

[S2K2K4]

The hub will never just pop out, the hubs are pressed into the spindle, Best bet will be to take the entire spindle off the car and take it to a shop, btw, you WILL be replacing the hub as well if you have to remove the hub from the spindle to replace the studs. They don't like being re-used and when you press it all back together they will seize badly.

On a side note, please include the year and model of your car. Its hard to diagnose issues without that information.

 

[Kezzie]

It's a 1996 Acura rl...dont know how I forgot that part lol..thanks for the response...any others??


Sent from my iPad using AG Free

 

[Kezzie]

Another angle



Sent from my iPad using AG Free

 

[S2K2K4]

Yeah, that just has to be pressed out via a hydraulic press of some sort.