Acura World banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Brakes would go to the floor and have no resistance. Put on foot on the brakes again and the brakes works.. Can anyone explain how to fix this problem. Brakes were bled. Master cylinder replaced. Still no résistance.
 

·
Registered
Joined
·
4 Posts
To be honest it sounds like there is still air in the system. Did whoever installed the master cylinder bench bleed it first? Sometimes air can become trapped in the MC and cause problems. Other than that, maybe you didn't get all the air out of the system.
 

·
Registered
Joined
·
4 Posts
Thanks for posting that thread.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top