Acura World banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hello out there!
My 1999 Acura 3.0 Cl passenger seat is stuck. It slides back and forth and the handle won't stay down to lock the seat in position. Any thoughts would be appreciated.

thanks
 

·
Old Parts Slinger
Joined
·
9,587 Posts
You probably have some gunk built up on the sliders. Try pulling the seat out, clear out all the gunk and apply a light film of grease on the sliders and see if that fixes anything.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Seat stuck

Thanks for the reply C25. How do you remove the seat and also, this seams like a lot more than just gunk on the slider. I checked again this morning and you really have to force the handle down for the seat to lock into position. It's as if a spring that pre-loads the handle with pressure that keeps it in the down and locked position has detached. But when I look, everything is attached and in place. Any thoughts?

thanks
 

·
Old Parts Slinger
Joined
·
9,587 Posts
Easies way is to take the seat out. It should be like 4 14mm bolts and a few plug connections and the entire thing should just lift out.
 
1 - 4 of 4 Posts
Top