Acura World banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1 (Edited)
Looking for an OEM (NOT aftermarket or rebuilt) drive axle from a 91-95 Legend to use for parts.

Coupe or sedan, manual or auto trans, doesn't matter. Low miles is a plus.
Driver's side axle is preferred, but a passenger side would also work.
Only need parts from the inboard joint, so that boot needs to be intact and not leaking. The condition of the outer joint does not matter.
Or if you are willing to remove the three inboard side bearings from the joint and sell only those, that could work too.

Let me know what you have!
Best way to reach me is by email, husseycm at google.
Thanks!
Chris
 

·
Registered
Joined
·
4,812 Posts
IMO, this job is so labor intensive that it's really not worth screwing around with. If you don't want to go OEM new, most aftermarket parts stores sell the whole shaft as a reman for $99 with a lifetime warranty.

Heck, Rock Auto has the whole CV shaft for under $50.
 
1 - 2 of 2 Posts
Top